Publicaciones

volver página principal

 
 

Detección y diagnóstico de fallos en máquinas eléctricas en estado estacionario y transitorio

Mutual Information and Meta-Heuristic Classifiers Applied to Bearing Fault Diagnosis in Three-Phase Induction Motors. Applied Sciences. 2021, 11(1), 314, pp. 1 – 17. https://doi.org/10.3390/app11010314 ISSN 2076-3417

Detection and quantification of bar breakage harmonics evolutions in inverter-fed motors through the dragon transform. ISA Transactions. 2020.

Time-Frequency Analysis Based on Minimum-Norm Spectral Estimation to Detect Induction Motor Faults. Energies. 13 – 16, pp. 1 – 12. https://doi.org/10.3390/en13164102

Estimation of Bearing Fault Severity in Line-Connected and Inverter-Fed Three-Phase Induction Motors. Energies. 13 – 13, pp. 1 – 17. 2020.

Condition Monitoring of Bearing Faults Using the Stator Current and Shrinkage Methods. Energies. 12 – 17, pp. 1 -13. 2019.

Reassigned Short Time Fourier Transform and K-means Method for Diagnosis of Broken Rotor Bar Detection in VSD-fed Induction Motors. Advances in Electrical and Computer Engineering. 19 – 2, pp. 61 – 68.

Diagnosis of wind turbine faults using generator current signature analysis: a review. Journal of Quality in Maintenance Engineering. pp. 1 – 28. 2019. https://doi.org/10.1108/JQME-02-2019-0020

Detection of broken rotor bars in non-linear startups of inverter-fed induction motors. 12th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives – SDEMPED 2019.

Detection of Broken Rotor Bars Faults in Inverter-Fed Induction Motors. XXIII International Conference on Electrical Machines (ICEM’2018)

Hybrid algorithmic approach oriented to incipient rotor fault diagnosis on induction motors. ISA Transactions. 80, pp. 427 – 438. 2018. https://www.sciencedirect.com/science/article/pii/S0019057818302891?via%3Dihub

An Experimental Comparative Evaluation of Machine Learning Techniques for Motor Fault Diagnosis Under Various Operating Conditions. IEEE Transactions on Industry Applications. 54 – 3, pp. 2215 – 2224. 2018. . ISSN 0093-9994

Discriminating the lubrication condition from the rotor bearing fault in induction motors using Margenau-Hill frequency distribution and artificial neural networks. Industrial Lubrication and Tribology. 69 – 6, pp. 970 – 979. 2017. https://doi.org/10.1108/ILT-08-2016-0177 ISSN 0036-8792

High-resolution Spectral Analysis for Fault Detection on Induction Motors Fed by Variable-Speed Drives. Journal of Scientific & Industrial Research. 76 – September 2017, pp. 545 – 549. 2017. http://nopr.niscair.res.in/handle/123456789/42696

Analysis of Various Inverters feeding Induction Motors with Incipient Rotor Fault using High-resolution Spectral Analysis Electric Power Systems Research. 152, pp. 18 – 26.2017.

A Comparison of Techniques for Fault Detection in Inverter-fed Induction Motors in Transient Regime. IEEE Access. 5 – 1, pp. 8048 – 8063. 2017. http://ieeexplore.ieee.org/document/7922498/

Early fault detection in induction motors using AdaBoost with imbalanced small data and optimized sampling. IEEE Transactions on Industry Applications. 53 – 3, pp. 3066 – 3075. 2017. http://ieeexplore.ieee.org/stamp/stamp.jsp?arnumber=7593238

Methodology for fault detection in induction motors via sound and vibration signals. Mechanical Systems and Signal Processing. 83, pp. 568 – 589. 2017. ISSN 0888-3270

Robust detection of incipient faults in VSI-fed induction motors using quality control charts. IEEE Transactions on Industry Applications. 53 – 3, pp. 3076 – 3085 2017. http://ieeexplore.ieee.org/stamp/stamp.jsp?arnumber=7590081

State of the Art and Trends in the Monitoring, Detection and Diagnosis of Failures in Electric Induction Motors. Energies. 10 – 7, pp. 1056 – 1090. 2017. https://doi.org/10.3390/en10071056

Bearing fault diagnosis based on Lasso regularization method. 2017 IEEE 11th International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives 2017

Evaluation of intelligent approaches for motor diagnosis under changing operational conditions 2017 IEEE 11th International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED)

Time domain diagnosis of multiple faults in three phase induction motors using intelligent approaches 2017 IEEE 11th International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED)

Non-uniform Time Resampling for Diagnosing Broken Rotor Bars in Inverter-fed Induction Motors. IEEE Transactions on Industrial Electronics. 2016. ISSN 1557-9948

Sistemas Inteligentes Aplicados Na Estimação De Falhas De Rolamentos Em Motores De Indução Trifásicos Alimentados Por Inversores De Frequência CBA2016 – XXI Congresso Brasileiro de Automática

Detection and diagnosis of lubrication and faults in bearing on induction motors through STFT 2016 International Conference on Electronics, Communications and Computers, CONIELECOMP 2016

Advances in Classifier Evaluation: Novel Insights for an Electric Data-Driven Motor Diagnosis. IEEE Access. 4, pp. 7028 – 7038. 2016. http://ieeexplore.ieee.org/document/7723846/ ISSN 2169-3536

Rotor unbalance and broken rotor bar detection in inverter-fed induction motors at start-up and steady-state regimes by high-resolution spectral analysis. Electric Power Systems Research. 133, pp. 142 – 148. 2016. http://www.sciencedirect.com/science/article/pii/S0378779615003867 ISSN 0378-7796

An application of artificial neural networks and PCA for stator fault diagnosis in inverter-fed induction motors 2016 XXII International Conference on Electrical Machines (ICEM). 2016. http://dx.doi.org.ponton.uva.es/10.1109/ICELMACH.2016.7732822

Reliable detection of broken rotor bars in induction motors via MUSIC and ZSC methods. 2016 XXII International Conference on Electrical Machines (ICEM) http://dx.doi.org.ponton.uva.es/10.1109/ICELMACH.2016.7732932

Analysis of fault signatures for the diagnosis of induction motors fed by voltage source inverters using ANOVA and additive models. Electric Power Systems Research. 121, pp. 1 – 13. 2015. http://www.sciencedirect.com/science/article/pii/S0378779614004283

Comparative Study of Time-Frequency Decomposition Techniques for Fault Detection in Induction Motors Using Vibration Analysis during Startup Transient. Shock and Vibration. 2015, pp. 1 – 14. 2015.

Fault Detection in Inverter-fed Induction Motors in Transient Regime: State of the Art Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED), 2015 IEEE 10th International Symposium on.

Supervised diagnosis of induction motor faults: A proposed methodology for an improved performance evaluation Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED), 2015 IEEE 10th International Symposium on.

Transient detection of close components through the chirplet transform: Rotor faults in inverter-fed induction motors Industrial Electronics Society, IECON 2014 – 40th Annual Conference of the IEEE.

Broken rotor bar detection in VSD-fed induction motors at startup by high resolution spectral analysis 2014 International Conference on Electrical Machines, ICEM.

Mixed eccentricity diagnosis in Inverter-Fed Induction Motors via the Adaptive Slope Transform of transient stator currents. Mechanical Systems and Signal Processing. 48 (1-2), pp. 423 – 435. 2014. http://www.sciencedirect.com/science/article/pii/S0888327014000703

Broken bar condition monitoring of an induction motor under different supplies using a Linear Discriminant Analysis 9th IEEE Symposium on Diagnostics for Electrical Machines, Power Electronics & Drives (SDEMPED’2013)

Early Broken Rotor Bar Detection Techniques in VSD-fed Induction Motors at Steady-state 9th IEEE Symposium on Diagnostics for Electrical Machines, Power Electronics & Drives (SDEMPED’2013)

Neural network broken bar detection using time domain and current spectrum data 2012 XXth International Conference on Electrical Machines (ICEM).

Detection of broken bars in railway induction motors fed by frequency converter using spectral analysis of line current. International Review of Modelling and Simulations (I.R.E.M.O.S.). 5/2, pp. 959 – 966. 2012. http://www.praiseworthyprize.com/IREMOS-latest/IREMOS_vol_5_n_2.html

Railway traction electric motors. Characteristics and techniques of electric system maintenance. DYNA Ingeniería e Industria. 86/4, pp. 448 – 455. 2011. http://www.revistadyna.com/search/railway-tractionelectric-motors-characteristics-and-techniques-of-electric-system-maintenance

Robust Condition Monitoring for early detection of broken rotor bars in induction motors. Expert Systems with Applications. 38/3, pp. 2653 – 2660. 2011. http://www.journals.elsevier.com/expert-systems-with-applications/

Identification of eccentricity related-faults characteristic frequencies in induction motors using a programmable power source 8th IEEE Symposium on Diagnostics for Electrical Machines, Power Electronics & Drives (SDEMPED’2011)

Diagnosis of induction motors fed by supplies with high harmonic content using Motor Current Signature Analysis 2011 International Conference on Power Engineering, Energy and Electrical Drives – Powereng 2011

Robust multivariate control charts for early detection of broken rotor bars in an induction motors fed by a voltage source inverter 2011 International Conference on Power Engineering, Energy and Electrical Drives – Powereng 2011

Bearing Lubrication Assessment using a Statistical Analysis of the Stator Current Spectrum ICEM 2010. International Conference on Electrical Machines

Eccentricity Diagnosis in Inverter – Fed Induction Motors via the Analytic Wavelet Transform of Transient Currents ICEM 2010. International Conference on Electrical Machines

Experimental identification of induction motor broken bar characteristic frequencies using a programmable power source ICEM 2010. International Conference on Electrical Machines

Assessment of the lubrication condition of a bearing using spectral analysis of the stator current 20th International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM 2010)

Practical Aspects of Mixed-Eccentricity Detection in PWM Voltage-Source-Inverter-Fed Induction Motors. IEEE Transactions on Industrial Electronics. 57/1, pp. 252 – 262. 2010. http://ieee-ies.org/index.php/pubs/ieee-transactions-on-industrial-electronics

Some practical aspects of eccentricity detection in induction motors for different supply conditions XVIII-INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES, IEEE ICEM 2008

Detection of mixed eccentricity in railway traction induction motors using spectral analysis of line current. Libro: Safety and reliability for managing risk. pp. 215 – 220. (Portugal): Taylor & Francis, 2006. ISBN 0-415-41620-5

Detection of bearing faults in cage induction motors fed by frequency converter using spectral analysis of line current. Proceedings of the International Electric Machines and Drives Conference 2005. pp. 17 – 22.

Motores de Inducción. Técnicas de Mantenimiento Predictivo. Motores de Inducción. Técnicas de Mantenimiento Predictivo. (España): Abecedario, 01/01/2005. ISBN 84-934437-8-6

Detection of Bearing Faults in Cage Induction Motors Fed by Frequency Converter using Spectral Analysis of Line Current IEEE Electric Machines and Drives Conference, IEMDC 2005 Practical application of the spectral analysis of line current for the detection of mixed eccentricity in cage induction motors fed by frequency converter ICEM 2004: 16th International Conference on Electrical Machines

Practical application of the spectral analysis of line current for the detection of mixed eccentricity in cage induction motors fed by frequency converter. Proceedings of the ICEM 2004: 16th International Conference on Electrical Machines. pp. 444 – 447. (Polonia): 2004. ISBN 83-921428-0-2

Fallos característicos de los motores de inducción. Fallos en el estator. Ingeniería y Gestión de Mantenimiento. 22, pp. 79 – 84. 2004.

Fallos característicos de los motores de inducción. Fallos en el rotor. Ingeniería y Gestión de Mantenimiento. 35, pp. 74 – 79. 2004.

Fallos característicos de los motores de inducción. Fallos en rodamientos y eje. Ingeniería y Gestión de Mantenimiento. 36, pp. 69 – 72. 2004.

Líneas de Investigación

 
 
Medida, cálculo y análisis de la calidad de la energía eléctrica

A Study of the Effects of Time Aggregation and Overlapping within the Framework of IEC Standards for the Measurement of Harmonics and Interharmonics. Applied Sciences. 9 – 21, pp. 1 – 21. (Suiza): MDPI, 2019. . ISSN 2076-3417

Accurate identification and characterization of transient phenomena using wavelet transform and mathematical morphology. IET Generation, Transmission & Distribution. 13 – 18, pp. 4012 – 4028. IET, 2019. . ISSN 1751-8687

Study of the harmonic and interharmonic content in electrical signals from photovoltaic generation and their relationship with environmental factors. Journal of Renewable and Sustainable Energy. 11 – 4, pp. 043502-1 – 043502-10. 2019.

Methodology for flicker estimation and its correlation to environmental factors in photovoltaic generation. IEEE Access. 6 – 1, pp. 24035 – 24047. 2018. https://ieeexplore.ieee.org/document/8344755/

Vibration, Acoustic Noise Generation and Power Quality in Inverter-fed Induction Motors. 12th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives – SDEMPED 2019.

Impacto de la recarga de vehículos eléctricos en la contaminación armónica en las redes eléctricas. Ciudades inteligentes totalmente integrales, eficientes y sostenibles. pp. 271 – 284. Universidad Santiago de Cali, 2018.

Micro-genetic algorithms for detecting and classifying electric power disturbances. Neural Computing & Applications. pp. 1 – 14. Springer, 17/05/2016.

Mobile application for monitoring and visualization of data applied to power quality systems. Congreso Internacional de Ingeniería, CONIIN 2016.

Líneas de Investigación

 
 
Fiabilidad y Mantenimiento de Instalaciones Eléctricas

MVDC, a new system for the management and operability of electricity distribution grids. Dyna. 95 – 6, pp. 579 – 582. 2020. http://dx.doi.org/10.6036/9493

A comprehensive review of the impact of transmission technologies of the electrical grid. Revista Facultad de Ingeniería. 93 – Oct-Dec, pp. 9- 18. 2019. DOI: https://www.doi.org/10.17533/udea.redin.20190515

Diagnosis of wind turbine faults using generator current signature analysis: a review. Journal of Quality in Maintenance Engineering. ahead-of-print – ahead-of-print, pp. 1 – 28. 2019. ISSN 13552511. OI: https://doi.org/10.1108/JQME-02-2019-0020

Quantitative failure rates and modes analysis in photovoltaic plants. Energy. 183 – September, pp. 825 – 836. 2019. DOI: https://doi.org/10.1016/j.energy.2019.06.185

A review of photovoltaic systems: Design, operation and maintenance. Solar Energy. 188 – August, pp. 426 – 440. Elsevier, 15/06/2019. DOI: https://doi.org/10.1016/j.solener.2019.06.017

Analysis and characterization of PV module defects by thermographic inspection. Revista Facultad de Ingeniería. 93 – Oct-Dec, pp. 92 – 104.Universidad de Antioquia, 2019. DOI: https://www.doi.org/10.17533/udea.redin.20190517

Maintenance Models Applied to Wind Turbines. A Comprehensive Overview. Energies. 12 – 2, pp. 225 – 266. 2019. DOI: https://doi.org/10.3390/en12020225

Proyecto EMBER: análisis de indicadores eléctricos para mantenimiento predictivo en electrobombas sumergibles XXXV Congreso de AEAS Asociación Española de Abastecimientos de Agua y Saneamiento 2019.

Technological review of the instrumentation used in aerial thermographic inspection of photovoltaic plants. Renewable and Sustainable Energy Reviews. 93 – October, pp. 566 – 579. 2018. DOI: https://doi.org/10.1016/j.rser.2018.05.027

Comparative analysis of faults from stall controlled wind turbines with asynchronous generators and pitch controlled wind turbines with synchronous generators. Dyna. 93 – September, pp. 541 – 548. 2018. DOI: http://dx.doi.org/10.6036/8741

Image Resolution Influence in Aerial Thermographic Inspection of Photovoltaic Plants. IEEE Transactions on Industrial Informatics. 14 – 12, pp. 5678 – 5686. 2018. DOI: 10.1109/TII.2018.2865403
Wind turbine maintenance. A review. Dyna. 93 – July, pp. 435 – 441. 2018. DOI: http://dx.doi.org/10.6036/8622

Aerial Thermographic Inspection of Photovoltaic Plants: Analysis and Selection of the Equipment SWC 2017: ISES Solar World Congress.

Failure Rate Determination and Failure Mode, Effect and Criticality Analysis (FMECA) Based on Historical Data for Photovoltaic Plants SWC 2017: ISES Solar World Congress.

Vibration Analysis as a Diagnosis Tool for Health Monitoring of Industrial Machines. Shock and Vibration. 1235139, pp. 1 – 14.2016. ISSN 1070-9622

Continuity of electric supply in hospitals: supply schemes, typification of loads and interior electrical distribution. DYNA energía y sostenibilidad. 3, pp. 1 – 11. 2014. http://www.dyna-management.com/Articulos/Listado.aspx?idMenu=26380db2-c59a-429e-914b-265578b8533c&Materia=3306

Operational Risk Determination in Contact Lines for Electric Railways. Dyna Ingeniería e Industria. 89-6, pp. 665 – 671. 2014. http://www.revistadyna.com/

Guide of good practices to guarantee continuity of electrical supply in hospitals. Dyna Ingeniería e Industria. 89, pp. 255 – 256. 2014. http://www.revistadyna.com/search/guide-of-good-practices-to-guarantee-continuity-of-electrical-supply-inhospitals

Directriz del Sacyl para suministro eléctrico en hospitales XXIX Congreso Nacional de Ingeniería Hospitalaria. 2011

Determination and optimization of the maintenance frequencies in the overhead contact line system. Journal of Transportation Engineering. 136/11, pp. 964 – 972. 2010. http://ascelibrary.org/doi/abs/10.1061/(ASCE)TE.1943-5436.0000166

Criticality determination based on failure records for decision-making in the overhead contact line system. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit. 223/5, pp. 485 – 494. 2009. http://pif.sagepub.com/content/223/5/485.abstract

Warning procedures for systems that are improving. Quality and Reliability Engineering International. 24. 4, pp. 377 – 387. 2008. http://onlinelibrary.wiley.com/doi/10.1002/qre.897/abstract

Tabu search based algorithm for the multi-criteria optimisation of service restoration in electrical distribution networks. International Review of Electrical Engineering. 2,1, pp. 5 – 13. 2007. http://www.praiseworthyprize.com/IREE-latest/IREE_vol_2_n_1.html

Load restoration in electric distribution networks using a metaheuristic technique 2006 IEEE Mediterranean Electrotechnical Conference. 2006

Adaptación de la filosofía RCM en la planificación del mantenimiento preventivo cíclico en un sistema geográficamente disperso. Ingeniería y Gestión de Mantenimiento. 50, pp. 36 -41. 2006. ISSN 1695-3754

Determinación de las frecuencias base de mantenimiento en un sistema geográficamente disperso. Ingeniería y Gestión de Mantenimiento. 49, pp. 57 – 62. 2006.
Assessing trends in Duane plots using robust fits. Reliability Engineering & System Safety. 90/1, pp. 106 – 113.2005.
http://www.sciencedirect.com/science/article/pii/S0951832005001043

A Fuzzy Markov Model Including Optimization Techniques to Reduce Uncertainty. 12th IEEE Mediterranean Electrotechnical Conference – MELECON 2004.

An analytical methodology for the evaluation of urban distribution networks reliability. UIE2000 International Conference. 2000

Validation of the minimal cut set method for the reliability evaluation of distribution networks using Monte Carlo simulation. Weather conditions influence. IASTED International Conference on Power and Energy Systems – PES’2000. 2000

Inclusion of Preventive Maintenance and Weather Conditions Influence in Reliability Analysis of Distribution Networks Using Minimal Cut set – Markov Processes Mixed Techniques. MELECON’96: 8th Mediterranean Electrotechnical Conference. 1996

Fiabilidad de los motores de inducción. Estudios históricos y necesidad de actualización (I). Gestión de Activos Industriales. 22, pp. 36 – 41.2002.

Fiabilidad de los motores de inducción. Estudios históricos y necesidad de actualización (II). Gestión de Activos Industriales. 23, pp. 89 – 94 2002.

Líneas de Investigación

 
 
Predicción de consumos y Eficiencia Energética

A review of energy consumption forecasting in smart buildings: methods, forecasting horizon, input variables and metrics. Applied Sciences. 10 – 8323, pp. 1 – 27. 2020. .

A review of strategies for building energy management system: Model predictive control, demand side management, optimization, and fault detect & diagnosis. Journal of Building Engineering. Elsevier, 2020.

Influence of the rail electrification system topology on the energy consumption of train trajectories. IET Renewable Power Generation. 2020. ISSN 1752-1416

Short-time transient tracking algorithm for a non-residential facility based on characteristic indices. Electric Power Systems Research. 171 – June 019, pp. 185 – 193. 2019. https://doi.org/10.1016/j.epsr.2019.02.022

Identification of the electrical load by C-means from non-intrusive monitoring of electrical signals in non-residential buildings. International Journal of Electrical Power & Energy Systems. 104 – January 2019, pp. 21 – 28. 2018. https://www.sciencedirect.com/science/article/pii/S0142061518305945

Análisis de la contribución fotovoltaica en un edifico de cero emisiones. Ciudades inteligentes totalmente integrales, eficientes y sostenibles. pp. 781 – 794. Universidad Santiago de Cali, 2018.

Power Consumption Analysis of Electrical Installations at Healthcare Facility. Energies. 10 – 64, pp. 1 – 14. 2017. http://www.mdpi.com/1996-1073/10/1/64

A statistical modeling approach to detect anomalies in energetic efficiency of buildings. Energy and Buildings. 110, pp. 377 – 386. 2016. http://www.sciencedirect.com/science/article/pii/S0378778815303716

Cost optimization of electrical contracted capacity for large customers. International Journal of Electrical Power & Energy Systems. 46, pp. 123 – 131. 2013. http://www.sciencedirect.com/science/article/pii/S0142061512005844

Eficiencia energética de transformadores de potencia en centros hospitalarios. Todo Hospital. 276, pp. 25 – 30. 2012. http://www.hospitecnia.com/Edificacion-Instalaciones/Articulos/TODO-HOSPITAL-276-Eficiencia/id-Lcchidhjbidgcee.xsql

Short-term hourly load forecasting of a hospital using an artificial neural network. Renewable Energy and Power Quality Journal. pp. 1 – 6. 2011. ISSN 2172-038X

Modelo para la estimación de la demanda de energía eléctrica en un hospital de nueva creación. Revista Científica y Técnica de la Asociación Española de Ingeniería Hospitalaria. pp. 28 – 35. 2006.

Líneas de Investigación

 
 
Energías renovables e integración con Generación Distribuida (GD) en Smart Grids y Microrredes

A methodology for the conversion of a network section with generation sources, storage and loads into an electrical microgrid based on Raspberry Pi and Home Assistant. III Ibero-American Congress of Smart Cities (ICSC-CITIES 2020). Costa Rica

Low-cost and real-time measurement system for electrical energy measuring of a smart microgrid. III Ibero-American Congress of Smart Cities (ICSC-CITIES 2020). Costa Rica

Study and improvement of the efficiency of a hydraulic pumping system associated with a Pelton hydraulic turbine in a smart microgrid. III Ibero-American Congress of Smart Cities (ICSC-CITIES 2020). Costa Rica

A Comprehensive Review of Operation and Control, Maintenance and Lifespan Management, Grid Planning and Design, and Metering in Smart Grids. Energies. 12 – 9, pp. 1630 – 1680. 2019. DOI: https://doi.org/10.3390/en12091630

Diagnosis of wind turbine faults using generator current signature analysis: a review. Journal of Quality in Maintenance Engineering. ahead-of-print – ahead-of-print, pp. 1 – 28. 2019. ISSN 13552511. OI: https://doi.org/10.1108/JQME-02-2019-0020

Quantitative failure rates and modes analysis in photovoltaic plants. Energy. 183 – September, pp. 825 – 836. 2019. DOI: https://doi.org/10.1016/j.energy.2019.06.185

A review of photovoltaic systems: Design, operation and maintenance. Solar Energy. 188 – August, pp. 426 – 440. Elsevier, 15/06/2019. DOI: https://doi.org/10.1016/j.solener.2019.06.017

Analysis and characterization of PV module defects by thermographic inspection. Revista Facultad de Ingeniería. 93 – Oct-Dec, pp. 92 – 104.Universidad de Antioquia, 2019. DOI: https://www.doi.org/10.17533/udea.redin.20190517

Wind Resource Assessment on Puná Island. Applied Sciences. 9 – 14, pp. 1 – 20. 2019. https://www.mdpi.com/2076-3417/9/14/2923.

Spline adjustment for modelling solar intermittences. Revista Facultad de Ingeniería. 94 – Jan-Mar, pp. 77 – 86. 2019. DOI: https://www.doi.org/10.17533/udea.redin.20190524

Analysis of the influence of DC optimizers on photovoltaic production. Revista Facultad de Ingeniería. 94 – Jan-Mar, pp. 43 – 55. 2019. DOI: https://www.doi.org/10.17533/udea.redin.20190521

Maintenance Models Applied to Wind Turbines. A Comprehensive Overview. Energies. 12 – 2, pp. 225 – 266. 2019. DOI: https://doi.org/10.3390/en12020225

Simulation of a Solar-Assisted Air-Conditioning System Applied to a Remote School. Applied Sciences. 9 – 16, pp. 3398 – 3411. 2019. DOI: https://doi.org/10.3390/app9163398

Microrredes eléctricas. Integración de generación renovable distribuida, almacenamiento distribuido e inteligencia. Ed. Garceta. Pp. 558. 2019. ISBN: 978-84-1622-872-0

Technological review of the instrumentation used in aerial thermographic inspection of photovoltaic plants. Renewable and Sustainable Energy Reviews. 93 – October, pp. 566 – 579. 2018. DOI: https://doi.org/10.1016/j.rser.2018.05.027

Comparative analysis of faults from stall controlled wind turbines with asynchronous generators and pitch controlled wind turbines with synchronous generators. Dyna. 93 – September, pp. 541 – 548. 2018. DOI: http://dx.doi.org/10.6036/8741

Image Resolution Influence in Aerial Thermographic Inspection of Photovoltaic Plants. IEEE Transactions on Industrial Informatics. 14 – 12, pp. 5678 – 5686. 2018. DOI: 10.1109/TII.2018.2865403.

Wind turbine maintenance. A review. Dyna. 93 – July, pp. 435 – 441. 2018. DOI: http://dx.doi.org/10.6036/8622

Análisis de la contribución fotovoltaica en un edificio de cero emisiones. I Ibero-American Congress of Smart Cities (ICSC-CITIES 2020). España.

Aerial Thermographic Inspection of Photovoltaic Plants: Analysis and Selection of the Equipment SWC 2017: ISES Solar World Congress

Failure Rate Determination and Failure Mode, Effect and Criticality Analysis (FMECA) Based on Historical Data for Photovoltaic Plants SWC 2017: ISES Solar World Congress

Simulation of direct current microgrid and study of power and battery charge/discharge management. Dyna. 92 – 6, pp. 673 – 679. 2017. DOI: http://dx.doi.org/10.6036/8475

State of the Art and Trends Review of Smart Metering in Electricity Grids. Applied Sciences. 6 – 3, pp. 68 – 92. 2016. DOI: https://doi.org/10.3390/app6030068

Relationship between environmental variables and the performance of solar radiation using the spline fit. Dyna Energía y Sostenibilidad. 5 – 1, pp. 1 – 13. 2016.DOI: http://dx.doi.org/10.6036/ES8138

State of the Art and Trends Review of Smart Metering in Electricity Grids. Applied Sciences, 2016, 6(3), pp. 1–24

A review on measurement techniques for non-intentional emissions above 2 kHz. 2016 IEEE International Energy Conference, ENERGYCON 2016, 2016, 7513893

Study of unwanted emissions in the CENELEC-A band generated by distributed energy resources and their influence over narrow band power line. Energies, 2016, 9(12), 1007

Smart management of a distributed generation microgrid through PLC PRIME technology. Proceedings – 2015 International Symposium on Smart Electric Distribution Systems and Technologies, EDST 2015, 2015, pp. 374–379, 7315237

Reviewing microgrids from a multi-agent systems perspective. Energies, 2014, 7(5), pp. 3355–3382

Líneas de Investigación

 
 

volver página principal